ParaBody 425104 manual 100

FIGURE 37

STEP 37

• Assemble two 4-1/2” PULLEYS (43) to two 2 X 7-1/4” PLATES
(33) using two 3/8 X 2-1/4” BOLTS (86) four 3/8” WASHERS (91),
and two 3/8” LOCK NUTS (92) as shown in FIGURE 37.
	92
	43
	33
	91
86	3/8 X 2-1/4”
FIGURE 38
	100
100

STEP 38

•To assemble the PRESS CABLE (100) follow the cable routing as shown and use the following steps:

•Route the PRESS CABLE (100) around pulleys and L-brackets as shown in FIGURE 38.

	1/2		1/2		1/2		1/2		1/2		1/2
0		1		2		3		4		5	6

34