ParaBody 425 manual I i , i I, Continued On Next Page

Sep 4

A.To ~ssemble the PEC DEC CABLE (110), follow the cobble routing diagram on drawing, and use the following steps:

~Assemble each end of the PEC DEC CABLE (110) to the PEC CAMS(9).

*~Drope the CABLE (110) over the ~PULLEYSon the CENTERPULLEY BRACKET(10). (THIS

FORM A LOOP IN THE CENTER OF THE CABLE)

*Position the CABLERETAININO CLIPS (57) in a 45 DEGREEposition over the PULLEYSalqd the CABLES, and ~ighten the two PULLEY connections SECURELY.

B.To assemble the AB CABLE(111), follow the cable routing diagram on drawing, and use the follow~ng s{eps:

~LOOSELYassemble ~he PULLEY BRACKET(59) fo ~he AB CABLE (111) as shown in drawing using two I/4 IN. WASHERS(80), one two 1/4-28 IN. NUTS (81). (LOCATE PULLEY BRACKET HALFWAYUP ON THE THREADS OF THE AB CABLE. DO NOT TIGHTEN NUTS AT THIS TIME)

~Make a loop with the PEC CABLE (110) and attach the PULLEY BRACKET(59) to ~he F'EC CABLE (110) using one 3-1/2 X 1 IN. PULLEY (100), one 5/8 X 2 IN. BOLT (76), ~wo 3/8 IN. WASHERS(69), and one 3/8 IN. LOCK NUT (91).

(CONTINUED ON NEXT PAGE)

2 5 6

I i , i I I

27