ParaBody 425 manual Press Back Support to Rotate Freely, PIN Assemblysecurely

× 3-]./2"

A.Inserf ~wo I/2 IN. FLANGE BEARINGS(95) into ~he PRESS SUPPORTTUBE 18) as shown.

SECURELYassemble the PRESS BACK SUPPORT(3) fo the PRESS SUPPORTTUBE (8) as shown drawing, using one 1/2 X 5-1/2 IN. BOLT (68), fwo 1/2 IN. WASHERS(65), and one 1/2 LOCK NUT (gO). (TIGHTEN THE CONNECTIONENOUGHTO REMOVETHE PLAY, YET ALLOWING

PRESS BACK SUPPORT TO ROTATE FREELY)

Go SECURELYassemble one 1/2 IN. SPRING PIN ASSEMBLY(51) to the SPRING PIN HOUSING,

the	PRESS SUPPORTTUBE (8) as shown. (!!! IMPORTANT!!! TIGHTEN THE NUT OF THE SPRING
PIN	ASSEMBLYSECURELY)

22