ParaBody 950102 manual Ie~ ~uiderodsunno~25 ~innon~~/~.x 2-$/~bolt

\

°

3/B X 2-3/4

Leg Station Cable Assembly Instructions

Use this procedure to assemble the leg .station cable of the PARABOD950¥ S'T

STEP 1

A.Route the "loop" end of the leg cable (lOB) into the rear sl,}t of the leg weight stack base (I"B) behind the welght stack, and out through the slot near the leg station.

Securely attach the "loop" end of the.leg cable (lOB)., to the cam on the leg ¢url/e×'ienslon using one 3/8 x 1" bolt (97), two 3/8" washers (78), and one 3/8" nylock

Secure the leg cable= ~108) and one 3-1/2" pulley ~111) to the pulley flat on the leg f~'ame using one 3/8 x 2-1/4" .~,pIt(119), on~ 2-3/B 'L' bracket (75), three 3/B" washers (;~B), one spacer (120), and one 3/B nylock nut (83). (Note: The leg cable should be routed underneath shah leg of the 'L' bracket and over the top of the pulley. Also the 'L' brackef should be positioned af a 45 degree ang~e to function properly.)

Secure the leg cabl~= (IOB~ ~nd ~o 3~/2" pulleys (111). ~o the leg weight stack base (1B) two 3/s x 2-3/4"I)olts (99), four 3/8 flange spacers (74), and two 3/B" nylock nuts .(B3). Loop cable under the pulley prior to Inserting it into the slot.)

Secure the leg cable (108) and one 3-1/r pulley II11) to

ie~ ~uiderodsunno~(25) ~innon~~/~.x 2-$/~"bolt

two 3/8" flange spacers (74), and one 5/8" nylock nut~~~L (Nofe:-Loop the cable over the pulley prior to.inseding it in

3/8 X ~-3/