Pioneer PDP-5080HD Clock Setting, Selecting digital closed caption parameters, Selection

09Tuner Setup

Note

•The Primary Caption Service is usually offered for Service 1, and the Secondary Language Service is usually offered for Service 2 if these services are available.

Selecting digital closed caption parameters

Use the following procedure to change such parameters of digital closed captions as font size, font type, foreground and background colors.

1Press HOME MENU.

2Select “Tuner Setup” (/ then ENTER).

3Select “Closed Captions” (/ then ENTER).

4Select “Digital Settings” (/ then ENTER).

5Select “Font Size”, “Font”, or any other item (/ then ENTER).

6Select the desired parameter (/ then ENTER).

Closed Captions	Digital Settings	Font Size
		Large	xxxxxxxxxxxxxxxxxxxxx
Digital Settings	Font Size	Standard
		Small	xxxxxxxxxxxxxxxxxxxxx
			xxxxxxxxxxxxxxxxxxxxx
			Home Menu Exit

7Repeat steps 5 and 6 as necessary (, /).

8Press HOME MENU to exit the menu.

The following table shows the parameters selectable for each item.

Item	Selection
Font Size	Auto/ Large/ Standard/ Small
Font1	Auto/ Font 1/ Font 2/ Font 3/ Font 4/ Font 5/ Font 6/
	Font 7
Font Color	Auto/ Black/ White/ Red/ Green/ Blue/ Yellow/
	Magenta/ Cyan
Font Opacity	Auto/ Solid/ Transparent/ Translucent/Flashing
Background	Auto/ Black/ White/ Red/ Green/ Blue/ Yellow/
Color	Magenta/ Cyan
Background	Auto/ Solid/ Transparent/ Translucent
Opacity

1Font 1 (monospaced with serifs)/ Font 2 (proportionally spaced with serifs)/ Font 3 (monospaced without serifs)/ Font 4 (proportionally spaced without serifs)/ Font 5 (casual font)/ Font 6 (cursive font)/ Font 7 (small capitals font)

With “Auto” selected, parameters specified by the provider are used; if not specified by the provider, the bolded default parameters are used. If you select parameters other than “Auto”, the selected parameters are used regardless of the provider’s specifications.

Clock Setting

With “Auto Set” selected for Clock Setting, the system acquires and sets time information automatically. You can also manually set the correct time. If you disconnect the power cord from the power outlet or power blackout occurs, the set time is cleared.

44

1Press HOME MENU.

2Select “Tuner Setup” (/ then ENTER).

3Select “Clock” (/ then ENTER).

4Select “Time Zone” (/ then ENTER) .

5Select a time zone for your area (/ then ENTER).

Clock	Time Zone
	Atlantic	Current Time:	xxxxxxxxxxxxxxxxxxxxx
Time Zone		9:55 pm EDT
	Eastern		xxxxxxxxxxxxxxxxxxxxx
		Monday
	Central		xxxxxxxxxxxxxxxxxxxxx
		05/17/04
	Mountain
			Home Menu Exit

6Select “D.S.T.” (, /, then ENTER).

7Select “Applies” or “Does Not Apply” (/ then ENTER).

•When you start “Daylight Savings Time” mode, select “Applies” for “D.S.T.” and select “Does Not Apply” when you cancel it, otherwise the correct time will not be displayed regardless of the “Auto/Manual Set” setting.

Clock	Daylight Savings Time
		Current Time:	xxxxxxxxxxxxxxxxxxxxx
D.S.T.		9:56 pm EDT
	Applies		xxxxxxxxxxxxxxxxxxxxx
		Monday
	Does Not Apply		xxxxxxxxxxxxxxxxxxxxx
		05/17/04
			Home Menu Exit

8Select “Auto/Manual Set” (, /, then ENTER).

9Select “Auto Set” or “Manual Set” (/ then ENTER).

10If you select “Auto Set”, select an antenna (A or B) and a channel number using / and ENTER.

Clock	Auto/Manual Set	Clock Set Channel
				Current Time:	xxxxxxxxxxxxxxxxxxxxx
				11:58 pm PDT
Auto/Manual Set	•Auto Set	Ant. A	2.0		xxxxxxxxxxxxxxxxxxxxx
				Monday
					xxxxxxxxxxxxxxxxxxxxx
				05/17/04
					Home Menu Exit

•The date and time will be automatically corrected using data from the selected channel.

If you select “Manual Set”, manually set the date and time using /, / and ENTER.

Clock	Auto/Manual Set	Date and Time
		3	Current Time:
		4		xxxxxxxxxxxxxxxxxxxxx
Auto/Manual Set	•Manual Set		11:58 pm PDT
		3 /17/04 11:58pm		xxxxxxxxxxxxxxxxxxxxx
			Monday
		5		xxxxxxxxxxxxxxxxxxxxx
			05/17/04
		6
				Home Menu Exit

11Press HOME MENU to exit the menu.

Note

•If you setup the TV Guide On Screen™ system, the plasma display acquires clock information through the TV Guide On Screen™ system; in this situation you cannot set up the clock using the menu. If you select a parameter for the Clock menu and press ENTER, the menu screen disappears and a dialog box appears instead; press A to clear the dialog box.

En