Pioneer PDP-5080HD Using the Hdmi Control functions, Function Description Usable Devices

13Using the HDMI Control

Chapter 13

Using the HDMI Control

Using the HDMI Control functions

You can operate such Pioneer devices as a recorder, player or AV system support the HDMI Control functions using the remote control of the plasma display.

The HDMI Control functions include playback of content using on-screen control panel on the plasma display. For details, see the table below.

Note

•Maximum number of devices that can be connected and controlled using the remote control unit of the plasma display is as follows: recorder x 2, player x 2, AV system x 1.

•Not all device operations may be available for HDMI Control functions.

HDMI Control functions

Function	Description	Usable
		devices
Playback of	The proper input source is automatically selected	Recorder/
content	and the content is played back on the plasma	player
	display as you press PLAY on the connected device
On-screen	Recorder/player operation can be controlled on-	Recorder/
control	screen or with the remote control unit of the	player
	plasma display (play, stop, fast forward/reverse,
	etc.)
Display	Information on the display menu language is	Recorder/
Language	transferred to the recorder or player connected to	player
Setup	the plasma display. For details, see the operation
	manual that came with the recorder or player.
AV system	Receiver/amplifier operation can also be controlled	AV system
control	with the remote control unit of the plasma display
	(volume, surround mode and input selection of the
	HDMI terminal)
Power On	The plasma display can be turned On when the	Recorder/
	connected recorder(s) or player(s) is turned On and	player
	images are input to the plasma display.
Power Off	The connected device(s) can be turned Off when	Recorder/
	the plasma display is turned Off	player/AV
		system

• Press VOL +/– or e to adjust volume for the AV system.

•Press , , , , ENTER, RETURN

( ) or color (BLUE, RED, YELLOW, GREEN) buttons to use such functions as the disc navigator on the connected recorder or player.

Note

•When using the HDMI Control functions, operate the remote control unit while pointing it toward the remote control sensor (t) located at the bottom right of the front panel of the plasma display.

•You cannot use two or more HDMI terminals at the rear of the plasma display at the same time except “Power Off” and “Display Language Setup” functions.

74

En