Pioneer PDP-5080HD Enjoying through USB interface Home Gallery function, Readable memory cards

12Enjoying through External Equipment

Enjoying through USB interface (Home Gallery function)

On this system, you can watch JPEG images that have been captured and stored in memory cards using a digital still camera. You can also connect your digital camera directly to the plasma display using a USB connector cable.

Digital still	USB connector cable	Image data display
camera
	USB flash drive
	Multi-card reader

Note

•A single USB device can only be connected at a time. No USB hub can be connected.

•Such devices as a printer or keyboard cannot be connected and used.

Readable memory cards

This system can read memory cards whose formats are FAT12, FAT16, FAT32, or VFAT.

Readable data files

This system can read only JPEG files that meet the following conditions:

•Extensions are JPG or JPEG.

•JPEG 4:2:2 and 4:2:0 format

•The image resolution must be less than 3264 pixels in the horizontal direction and 2448 pixels in the vertical direction.

•The image resolution must be higher than 160 pixels in the horizontal direction and 120 pixels in the vertical direction.

Note

•This system may not be able to display images, depending on the type of your memory card, or camera.

•This system may not be able to display images modified or edited using a personal computer or other equipment.

•This system complies with the USB Mass Storage Class.

70

Connecting a USB device

Hold the USB device’s connector with its top side facing the front panel, and then insert it into the USB port on the side of the plasma display.

•Insert the USB device’s connector as far as it goes.

•When using the USB connector of your device, connect it directly to the USB port.

Side of the plasma display

USB flash drive or multi-card reader

Removing a USB device

To remove a USB device’s connector, quit the Home Gallery screen and then remove it.

Note

•For details on connectable devices, see Pioneer’s website: http://www.pioneerelectronics.com

•Be sure to quit the Home Gallery screen before removing the USB device. If you remove the USB device while the Home Gallery screen is displayed, data inside the memory may be damaged.

•Do not insert or remove the USB device immediately after the system is switched on or off. This may cause data inside the memory to be damaged.

•Do not turn the digital camera off while the Home Gallery screen is displayed.

En