11Adjustments and Settings

About “Option” menus

The “Option” menu consists of two screens. To select the desired menu, press / repeatedly to switch between Screen 1 and Screen 2. The current screen number appears at the top right corner on the screen.

Option

1/2

Position

 

Auto Size

Wide-Zoom

Side Mask

 

HDMI Input

 

HDMI Control Setting

 

Blue LED Dimmer

Auto

Orbiter

On

Video Pattern

 

Option

2/2

Digital Audio Out

Dolby Digital

Language

 

Tuner NR Setting

 

Game Control Pref

Off

Room Light Sensor

On

(For AV source)

Image position adjustment (AV source only)

Adjusts the horizontal and vertical positions of images on the plasma display.

1Press HOME MENU.

2Select “Option” (/ then ENTER).

3Select “Position” (/ then ENTER).

4Select “H/V Position Adjust” (/ then ENTER).

Position

H/V Position Adjust

Reset

5Adjust the vertical position (/) or horizontal position (/).

6Press HOME MENU to exit the menu.

Note

To restore the factory defaults for all the items, press / to select “Reset” in step 4, and then press ENTER. A confirmation

screen appears. Press / to select “Yes”, and then press

ENTER.

Adjustments are stored separately for each input source.

Depending on the displayed video, the image position may not change even after adjustment.

60

Automatic image position and clock adjustments (PC source only)

Use Auto Setup to automatically adjust positions and clock of images coming from a personal computer.

1Press HOME MENU.

2Select “Option” (/ then ENTER).

3Select “Auto Setup” (/ then ENTER).

Option

Auto Setup

Manual Setup

• Auto Setup starts.

4Press HOME MENU to exit the menu.

Note

When Auto Setup is finished, “Auto Setup completed.” appears.

Even when “Auto Setup completed.” appears, Auto Setup may have failed, depending on conditions.

Auto Setup may fail with a PC image composed of similar patterns or monochrome. If not successful, change the PC image and try again.

Be sure to connect the computer to the plasma display and switch it on before starting Auto Setup.

Depending on the displayed video, the image position may not change even after adjustment.

This function is not selectable when the PC is connected to the HDMI terminal.

Manual image position and clock adjustments (PC source only)

Usually you can easily adjust the positions and clock of images using Auto Setup. Use Manual Setup to optimize the positions and clock of images when necessary.

1Press HOME MENU.

2Select “Option” (/ then ENTER).

3Select “Manual Setup” (/ then ENTER).

4Select an item to be adjusted (/ then ENTER).

Manual Setup

 

H/V Position Adjust

 

Clock

0

Phase

0

Reset

 

5Perform adjustment (/ or /).

With “Clock” or “Phase” selected, you can change the parameter using /.

6Press HOME MENU to exit the menu.

En

Page 60
Image 60
Pioneer PDP-5080HD Image position adjustment AV source only, Manual image position and clock adjustments PC source only