32
En
Basic Operations
06
• In 2-screen or picture-in-picture mode, press SWAP to
switch the position of the two screens shown.
Left screen is the active screen which will be indicated by
“ ”. The user is allowed to operate picture and sound.
• In picture-in-picture mode, press SHIFT to move the
position of the small screen in anti-clockwise.
2To select the desired input source, press the appropriate
input source button.
• If watching TV programs, press CH +/– to change the
channel.
Note
•The SPLIT button is disabled while the TV Guide On Screen™
system is displayed.
• The multiscreen function cannot display images from the
same input source or two external input sources at the same
time. If you make such an attempt, a warning message
appears.
• When you press HOME MENU, the single-screen mode is
restored and the corresponding menu is displayed.
• When the two screens show the same analog broadcasting
coming through antenna A and B, the picture quality may differ
between the two screens.
• Displaying pictures in multi-screen mode for an extended
period may cause an after-image.
Freezing images
Use the following procedure to capture and freeze one frame
from a moving image that you are watching.
1Press FREEZE.
• A still image appears on the right screen while a moving
image is shown on the left screen.
2Press FREEZE again to cancel the function.
Note
• With the screen split, any image cannot be frozen.
• When you try to use this function when it is not available, a
warning message appears.
• Image FREEZE is canceled automatically if you do not perform
any operation for five minutes.
• Displaying pictures in FREEZE mode for an extended period
may cause an after-image.

Moving image Still image

PDP5080HD.book Page 32 Monday, April 9, 2007 7:49 PM