Pioneer PDP-5080HD Useful Remote Control Features, Presetting manufacturer codes, Library Search

14Useful Remote Control Features

Chapter 14

Useful Remote Control Features

Presetting manufacturer codes to control other devices

Presetting manufacturer codes

1Slide the Mode switch to match the device to which you want to preset the remote control signal.

2Press EDIT and 1 at the same time.

•The LED flashes.

3Press 0 to 9 to enter the manufacturer code. See page 79.

•Preset mode is finished once the LED no longer lights up.

Library Search

In the event that the device code for a particular target unit is unknown, you can cycle the remote through the available codes for that device mode and sample functions from each code in order to find the code that properly operates the desired target device.

1Slide the Mode switch to match the device to which you want to preset the remote control signal.

2Press EDIT and 3 at the same time.

•The LED indicator flashes and the remote control unit enters the Library Search programming mode.

3Press either SOURCE POWER, PLAY, 1 or CH+ to sample the selected code.

4When the code could not be found, press / to advance to the next code or return to the previous code and repeat step 3.

5Press ENTER when the code that properly operates the desired target device is found.

•All the available buttons for the selected mode are programmed in. The remote control unit returns to normal operation after turning the LED indicator on for one second for confirmation.

Manufacturing Reset

You can reset all the learned and preset codes to default regardless of the mode.

1Press EDIT and POWER in any Mode switch position at the same time.

•The LED indicator flashes and the remote control unit enters the Manufacturing Reset mode.

2Press D.

•A manufacturing reset is completed. The LED indicator flashes for one second and the remote control unit returns to normal operation.

Note

•To exit the Edit mode before it is complete, press EDIT again.

•If the Mode switch selection is changed when in the Edit mode, the Edit mode is canceled.

•If no operation is performed for more than one minute, the Edit mode is canceled.

•When you enter a code not listed, the LED flashes quickly.

•The initial mode is “PIONEER”.

•You may not be able to control some equipment in the tables partially or entirely with the supplied remote control unit.

78

En