Preparation

05

4 Connect the supplied speaker cables to the rear of

5 Connect the other end of the speaker cables to the

plasma display.

speaker.

Connect the cables correctly with respect to the polarity of

Connect the cables correctly with respect to the polarity of

the plasma display speaker terminals, that is, cable (Gray)

the speaker terminals, that is, cable (Gray) to terminals

to  terminals (Red) and  cable (Black) to  terminals

(Red) and  cable (Black) to  terminals (Black).

(Black).

 

 

 

 

Gray

Black

Gray

Black

Red

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Gray

Red

Black

Red

Black

 

 

 

 

Speaker terminal

English

Speaker terminal

Speaker cable

Speaker terminal

Note

Press the lever and insert the end of the cable.

When you release the lever, it clamps

onto the speaker cable.·

CautionLever

Be sure to turn the connected devices off and remove the power cord from the wall outlet beforehand when changing the connection or installation method.

If you insert the speaker cable too

far so that the insulation is touching the speaker terminal, you may not get any sound. Please insert it with showing the copper wire.

Check if the end of the speaker cables are securely connected to the terminals by slightly tugging on the cable after making connections. Loose connections may result in sound dropouts or noise.

If there is a short in the and cables caused by an exposed lead wire, excessive load may be applied to the plasma display, resulting in interrupted operation or malfunction.

Incorrect connections of the speaker cable to the right or left of the plasma display terminals with respect to the polarity may result in insufficient stereo sound effects, delivering poor bass sounds or unstable sound image.

Bundle the cable without pulling.

6 Bundle the cables.

Bead bands are included with the plasma display.

Use the bead bands as necessary.

When tidying up your speaker cables, make sure to bundle them so that they are not subjected to any pressure.

Rear view

Bead band

Speaker cable

19

En

Page 19
Image 19
Pioneer PDP-5080HD operating instructions Bundle the cables, Rear view