ParaBody GS4 manual X 3-3/4 8 X 3-3/4

3/8 X 3-3/4” 6
18	AN	37
28			19
	A
			C
			6 3/8 X 3-3/4”
			24
			35
			19
FIGURE 20

STEP 20:

•Route the large ball end of the LOW CABLE (AN) around one V- PULLEY (37) and assemble the PULLEY to the FRAME (A) using two 3/8 X 3-3/4” BOLTS (6), two19/32” FLANGE SPACERS (28), two 3/8” WASHERS (18) and two 3/8” LOCK NUTS (19) as shown in FIGURE 20.

•Route the small ball end of the LOW CABLE (AN) throught the BASE PLATES (C) and assemble two 3-1/2” PULLEYS (35) to the BASE PLATES (C) using two 3/8 X 3-3/4” BOLTS (6), four 1” SPACERS (24) and two 3/8” LOCK NUTS (19). See FIGURE 20.

21