ParaBody GS4 manual Screw PRE

5/16 X 1/4” SET

SCREW (PRE-

INSTALLED)

A

BEARINGBLOCK

PRESSARM

SUPPORT PIVOT

Y

3/8 X 1” 16

FLAT HEAD

ALLEN BOLT

X

FIGURE 12

STEP 12:

•Disassemble one of the BEARING BLOCKS from the PRESS ARM SUPPORT FRAME (X) and remove the PRESS ARM SUPPORT PIVOT as shown in FIGURE 12.

•Insert the PRESS ARM SUPPORT PIVOT thru the PRESS ARM SUPPORT FRAME (X) and the FRAME (A). Assemble the BEARING BLOCKS to the PRESS ARM SUPPORT FRAME (X) as shown in FIGURE 12.

•SECURELY tighten the two 5/16 X 1/4” SET SCREWS (PRE-INSTALLED)on the FRAME (A) as shown in FIGURE 12.

•SECURELYassemble the PRESSARMADJUSTMENT PLATE (Y) to the PRESSARM SUPPORT FRAME (X) using two 3/8 X 1” FLAT HEADALLEN BOLTS (16) as shown in FIGURE 12.

	1/2		1/2		1/2		1/2		1/2		1/2
0		1		2		3		4		5	6

13