1752 and 1754 SHDSL Router User’s Guide

Step 2: Create IPSec Interface

Click on the Create IPSec Interface link, the IPSec Interface page is displayed as follows:

Input the values on the fields respectively. The following table gives the range of values for each option, which can be specified with this command and a default value.

field

Description

interface name

Name of the interface

ikeport

The IKE port value; the UDP port number on

 

which IKE daemon listens on all valid unicast IPv4

 

and IPv6 addresses of this interface. The default

 

value is 500.

Status

The status of IPsec on this interface. The default

 

value is disabled.

Note: if to create a IPSec Interface successfully, a new WAN service should be created in advance via WAN connection page.

Step 3: Create IPSec Policy

If step1 and step 2 are successfully created, the Create IPSec Interface link will appear. Click on the link, and then the IPSec Interface page is displayed as follows:

Input the values on the fields respectively. The following table gives the range of values for each option, which can be specified with this command and a default value.

1752-A2-GB20-00

June 2005

79

Page 79
Image 79
Paradyne 1754 manual Create IPSec Interface