
1752 and 1754 SHDSL Router User’s Guide
Hardware Connection – Model 1754
1.Connect one of the supplied RJ11 cables to the port marked DSL
2.Insert one end of the RJ45 Ethernet cable into one of the LAN ports marked LAN on the back of the SHDSL router. Connect the other end of the cable into the Ethernet Network Interface Card (NIC) in your PC. Connect up to four Ethernet devices to the router. Use a crossover cable for a hub.
3.Connect an earth ground to the grounding terminal (marked FG).
4.Connect the supplied external AC adapter into the DC power outlet on the back of the router. Connect the power supply into your wall outlet or surge protector.
DSL
FG
LAN
CID
Reset
DC IN
RJ45
RJ11
| Switch |
| or |
Internet | Hub |
16 | June 2005 |