3. Using the Web Interface
Figure 3-12. CLIP Connection Setup
To complete the connection you must now click the Apply button. The Apply button will temporarily save this connection. To make the change permanent, click on Tools (at the top of the page) and select System Commands. At the System Commands page, click on Save All.
Modify an Existing Connection
To modify an existing connection:
Procedure
1.From the Home screen, click on Setup.
2.Click on the connection you want to modify. The connections are listed by name.
If you delete a connection, to make the change permanent, click on Tools (at the top of the page) and select System Commands. At the System Commands page, click on Save All.
| January 2005 |
