Paradyne 6381-A3 manual Modem Test, Ping Test

3. Using the Web Interface

Figure 3-35. Ping Test

Modem Test

The Modem Test is used to check whether your router is properly connected to the WAN Network by running OAM F4 and F5 end-to-end and segment tests. The test may take a few seconds to complete. To perform the test, select your connection from the list, select a Test Type, and click on the Test button.

Before running this test, make sure you have a valid DSL link; if the DSL link is not connected, this test will always fail. Also, the DSLAM must support this feature. Not all DSLAMs have OAM F4 and F5 support.

Figure 3-36. Modem Test

3-40 January 2005 6381-A2-GB23-10