Patton electronic 4630 Series Compliance, Radio and TV Interference, CE Declaration of Conformity

SmartNode 4630 Getting Started Guide A • Compliance information

Compliance

EMC

•FCC Part 15, Class A

•EN55022, Class A

•EN55024

Safety

•UL 60950-1/CSA C22.2 N0. 60950-1

•IEC/EN60950-1

•AS/NZS 60950-1

PSTN Regulatory

•TBR3

•AS/ACIF S031

Radio and TV Interference

The SmartNode router generates and uses radio frequency energy, and if not installed and used properly-that is, in strict accordance with the manufacturer’s instructions-may cause interference to radio and television reception. The SmartNode router have been tested and found to comply with the limits for a Class A comput- ing device in accordance with specifications in Subpart B of Part 15 of FCC rules, which are designed to pro- vide reasonable protection from such interference in a commercial installation. However, there is no guarantee that interference will not occur in a particular installation. If the SmartNode router does cause interference to radio or television reception, which can be determined by disconnecting the unit, the user is encouraged to try to correct the interference by one or more of the following measures: moving the computing equipment away from the receiver, re-orienting the receiving antenna and/or plugging the receiving equipment into a different AC outlet (such that the computing equipment and receiver are on different branches).

CE Declaration of Conformity

This equipment conforms to the requirements of Council Directive 1999/5/EC on the approximation of the laws of the member states relating to Radio and Telecommunication Terminal Equipment and the mutual rec- ognition of their conformity.

The safety advice in the documentation accompanying this product shall be obeyed. The conformity to the above directive is indicated by CE sign on the device.

The signed Declaration of Conformity can be downloaded at www.patton.com/certifications.

Compliance 41