Patton electronic Model 3088/I manual General characteristics, G.SHDSL characteristics, Ethernet

3088/I Getting Started Guide B • Specifications

General characteristics

•Compact low-cost Plug ‘n’ Play NTU

•10/100 Ethernet port

•Unlimited host support

•Comprehensive hardware diagnostics, independent of operating system, easy maintenance and effortless installation

•Plug ‘n’ Play operation for fast and seamless turn-up with pre-configured WAN and LAN options

•Built-in web configuration

•Simple software upgrade using FTP into FLASH memory

•Eight front panel LEDs indicate Power, DSL WAN, Ethernet LAN speed and status

•Convenient and standard RJ connectors for Ethernet, Line, and Console

•External UI

•Field factory default option

•Standard 1 year warranty

G.SHDSL characteristics

•4.6 Mbps maximum speed over 2-wire

•Data rates from 192 kbps to 4.608 Mbps

•Annex A (ANSI), Annex B (ETSI) PSD selection

•2-wire support ITU G.991.2 and ETSI TS 101524 with G.994.1 handshake

•When connecting two NTUs in a point-to-point application, one NTU must be set for central mode, the other for remote mode

•EOC management channel for remote end-to-end management

Ethernet

•Auto-sensing Full-duplex 10Base-T/100Base-TX Ethernet

•Standard RJ-45 and built-in MDI-X cross-over switch

•IEEE 802.1d transparent learning bridge up to 1024 addresses and Spanning Tree Protocol

Protocol support

•Complete internetworking with IP (RFC 741), TCP (RFC 793), UDP (RFC 768), ICMP (RFC 950), ARP (RFC 826)

•Built-in Ping and Traceroute facilities

•Point-to-Point Protocol over HDLC

General characteristics 50