Model 3101RC Getting Started Guide | 2 • Hardware Installation |
|
|
Ethernet Port (10/100 ENET) on Trunk Card
The Model 3101RC provides one RJ45 Jack (10/100 ENET) on the front panel of 3101RC card for Ethernet interface connection. The detailed pin assignment is shown in figure 5:
PIN 1 | PIN 8 |
1 | 2 | 3 | 6 | Other pins |
|
|
|
|
|
TX + | TX - | RX + | RX - |
|
|
|
|
|
|
LED A | LED B |
Figure 5. Ethernet Port
To connect the Ethernet interface to PC, the Ethernet crossover cable is required. The detailed pin assignment is shown below:
Figure 6. Ethernet crossover cable
Hardware Installation | 18 |
