Patton electronic Model 3101RC manual Provisioning a Management IP Port

Model 3101RC Getting Started Guide 3 • Configuration

Provisioning a Management IP Port

This section describes how to use CLI commands or Web GUI to provision an IP port for the Model 3101.

Referring to the previous section, use a console cable to connect a host PC and the Model 3101 through its console port (CONFIG). Then on PC run the terminal program with the setting shown below:

Figure 9. Terminal program settings

Note For both CLI and Web Configuration Tool, the default login user- name and password are: admin/admin.

CLI

In the PC terminal screen, type in the login user name and password to login the system. Type the following command to check current IP setting of all the management ports.

Command	Explanation
enable	Enter enable command mode.
show management all	Display all system management port IP settings.

LOCAL login: admin

Password:

this is motd file to inform any information to user

PATTON

System Description:3101 48-port ADSL2+ POTS Hardware Version:A

Firmware Version:0.74B03

Software Version:0.74B03

Compiled Wed Oct 24 16:41:23 CST 2007 local:>enable

local:%show management all

GBEMGMT

------------------------------------------------

IP Address :192.168.100.1	192.168.1.1
Network mask :255.255.255.0	255.255.255.0
Default route:--	--
local:>

Provisioning a Management IP Port 21