9400 Series Operator's Handbook
Entering Special Symbols
The symbols below are available for Standard (Std), Reduced (R), and OCR fonts.
To enter a special symbol, press H (Shift), then press the required key. When you press the shift key, the keyboard locks in shift mode. Press the shift key again when you're finished, to restore the keyboard to normal mode.
Press |
| To Print | Fonts |
H 0 | = | ) | Std, R, Bold |
H 1 | = | ' (apostrophe) | Std, R |
H 2 = | 1/2 | Std | |
H 3 = | # | Std, R | |
H 4 = | ? | Std, R | |
H 5 = | = | Std, R | |
H 6 = | ! | Std, R | |
H 7 = | & | Std, R | |
H 8 = | , | Std, R, OCR | |
H 9 | = | ( | Std, R, Bold |
H / = | > | Std, R, OCR | |
H ¢ = | + | Std, R, OCR | |
H P = | b (blank space) | See note below. | |
H $ = | % | Std, R | |
H . = | * (asterisk) | Std, R | |
H - = | : | Std, R, OCR | |
NOTE: In Format Entry, use the shift/space key to insert a
b(reserved space) in prompts. To insert a space in your data for data entry, use only the space key.
Press the H key when you finish entering symbols to restore the keyboard to normal typing mode.
