1. Getting Started
Entering and Changing Data
The keyboard gives you the ability to enter numeric, alpha, or alphanumeric data. To send data to the printer, enter the desired data and press E.
The screen always shows a prompt with underscores to show the maximum length for the data.
Format: SAMPLE
Enter Batch Name:________
For example, this screen shows you can enter up to 8 characters before pressing E. If you try to enter more than 8 characters, the printer beeps. Your entry is not accepted until you press H .
Some fields specifically require numeric or alphabetic data. If you try to enter numeric data for an alpha field, or alphabetic data for a numeric field, the printer will beep. You must then enter the correct data, and press E .
If you want to change any data before pressing E , either:
∙Type new data over the old data, then press E .
∙Press C to clear the data and
∙Use the cursor movement keys to move to the specific character(s) you want to change. Press E after you make the changes.
Getting Started
