Paxar 9400 manual Adjusting the Print Contrast

9400 Series Operator's Handbook

2.Press D until you see Define Supply Type, then press E . You'll see

Select Supply Type: B

A)lign, B)lack Mark or D)ie Cut

3.Type A and press E .

Adjusting the Print Contrast

You can adjust the print contrast to darken or lighten printing. You can also print a test tag to check the adjustments you make. The adjustment range is from -99 (lighter) to +20 (darker).

NOTE: The normal print contrast setting (+00) prints accurate bar codes on most tag or label stock. If you change the print contrast, use a bar code verifier to be sure your bar codes scan correctly.

1.From the main menu, press U or D to display Data Entry.

Press E . You'll see

Data Entry Mode	↓
Select Format: NAME	__

2.Press #. You'll see

Enter password:_ _ _ _ _ _ _ _

3. Type the 1-8 character password and press E .

2-16