5. Setting Printer Options
Adjusting the Cut Position
This feature adjusts where the tag is cut. For example:
∙You may need to adjust the cut up or down for aperture supplies.
∙If the cut is occurring in the preprint of the supply, move the cut up.
The default is increase (1) from step zero (0). The steps are in 1/192 inches (one dot). A dot is the smallest area on which the printer can print. Increase moves the cut up; decrease moves the cut down.
1.From the main menu select Printer Options and press
E.
2.When you see
Select Printer Option: | ↓ |
Use Batch Separators | __ |
|
|
press D to display Adjust Cut Position, then press
E .
3.You'll see
Cut adjustment
I)ncrement or D)ecrement? I
Setting Printer Options
