9400 Series Operator's Handbook
Defining the Supply Type
The printer contains a sensor to detect the supply. You must tell the printer the type of supply you're using; die cut or black mark/aperture. This screen also allows you to recalibrate the printer if the format should become misaligned as you are printing batches.
Aperture | Black Mark |
(through supply) | (on back of supply) |
1.From the main menu select Printer Options and press E. You'll see
Select Printer Option
Use Batch Separators
2.Press D until you see Define Supply Type, then press E . You'll see
Select Supply Type: B
A)lign, B)lack Mark or D)ie Cut
