L o a d i n g L a b e l s f o r P e e l M o d e

Peel mode separates the label from the backing paper while printing.

NOTE

The minimum label length for peeling is

0.75inches (19 mm). Hold the leading edge of peeled labels when printing on

supply longer than six inches.

1. Remove and discard the tape from a new roll of supply. Unwrap and discard supply with any glue residue.

2. Press the release levers (located on both sides of the printer) towards the front of the printer to release the supply door.

3. Lift open the supply door. The supply door support at the right-hand rear of the printer holds the supply door open.

Supply Door

Support

Loading Supplies 3-7