6. Slide a roll of labels onto the supply holder.

If the core diameter on your roll of labels is 1 inch in diameter, remove the 1.5-inch supply core adapters from the supply holder guides.

7. Slide the supply holder guide back onto the end of the supply holder. If you are using the supply core adapters for 1.5-inch core supply, make sure to push the supply core adapters into the ends of the supply.

8. Insert the ends of the supply holder into the slots in the supply roll mount.

Supply Roll

Mount

IMPORTANT INFORMATION

Make sure the plastic line attaching the supply holder to the printer is tucked down out of the way of the supply holder and supply holder guides. Otherwise, the plastic line may wrap around the supply holder or get caught on the supply holder guides.

Loading Supplies 3-9