For serial communication:

1. Turn off the printer before connecting the cable.

2. Connect a serial printer cable from the host to the serial port at the back of the printer.

USB Port

9-pin

 

Serial Port

3. Secure the cable with the connecting screws.

The factory defaults are 9600 Baud, no parity, 8-bit data frame, 1 stop bit, and DTR flow control (96, N, 8, 1, DTR).

To set communication values, refer to the Packet Reference Manual.

USB Port

The printer has a USB (Universal Serial Bus) Version

1.1communication port. Drivers are available on our Web site for a variety of operating systems.

Getting Started 1-5