L o a d i n g F a n - F o l d S u p p l i e s

1. Place a stack of fan-fold supplies behind the printer, printing side up.

You may have to move the printer

to allow room for the supply.

2. Push the external supply guides (located on the back of the printer) out to their widest position.

External Supply Guides

3. Adjust the external supply guides so that they barely touch the edges of the supply.

4. Feed the fan-fold supplies, printing side up, into the external supply slot on the back of the printer and through the external supply guides.

5. Press the release levers (located on each side of the printer) towards the front of the printer to release the supply door.

6. Lift open the supply door. The supply door support at the right-hand rear of the printer holds the supply door open.

7. Leave the supply holder in the printer.

Loading Supplies 3-13