C a l i b r a t i n g t h e S u p p l y
1. Turn off the printer.
2. Press and hold the FEED button while turning on the printer.
3. To calibrate the supply, release the FEED button after the indicator light starts flashing ORANGE. The printer calibrates the black mark or die cut sensor, measures the label length, and prints the test labels.
To calibrate the ribbon, release the FEED button after the printer starts flashing RED. The printer calibrates the ribbon sensor.
4. To resume normal printing, turn off the printer, wait two seconds, then turn it back on again.
Troubleshooting