C A R E A N D |
|
5 | |
M A I N T E N A N C E |
|
|
This chapter tells you how to
♦clear supply jams
♦clean the printhead
♦clean the platen roller and printer.
C l e a r i n g S u p p l y J a m s
When you are printing and a jam occurs, the indicator light turns RED. To clear the jam:
1. Turn off the printer. Press the switch on the back of the printer to the OFF position (O).
You should turn off the printer’s power before you clear a supply jam. If you need to clear a supply jam during a print job, you may lose your data when you turn off the printer.
2. Press the release levers towards the front of the printer to release the supply door.
3. Lift open the supply door. The supply door support at the
4. If necessary, remove any previously loaded supply. Lift up the supply holder and remove one of the supply holder guides.
5. Slide the supply off the holder.
Care and Maintenance