Paxar 9856 manual I n t P o s i t i o n

3.Press L or R to see the other option. After you display the option you want, press E. Press U twice to exit to the Main menu.

P r i n t P o s i t i o n

This function adjusts where data prints vertically on the supply. Adjust the print if it is too close to the top or bottom of the supply, or overtypes the pre-printed area. One dot is 0.0033 inch.

♦If the data is too close to the bottom, increase the number.

♦If the data is too close to the top, decrease the number.

Changing this setting only affects new formats sent to

the printer.

To change the setting, from the Main Menu, select Setup, then Supply. Then, follow these steps.

1.Press L or R until you see

SUPPLY

l Print Pos r

2.Press E. You will see the current setting, for example:

Enter print pos [-99/99]: +0

3-4 Setting Supply Options