F l o w C o n t r o l
To change the setting, from the Main Menu, select Setup, Port Settings, then User Comm. Then, follow these steps.
1.Press L or R until you see
USER COMM
lFlow Control r
2.Press E. You will see the current setting, for example:
FLOW CONTROL
l DTR r
The XON character is 17; XOFF is 19. Set flow control to DTR for PC computers (unless you have XON/XOFF software).
3.Press L or R to display the flow control you need, press E. Press U three times to exit to the Main menu.
R e s e t t o D e f a u l t V a l u e s
To change the setting, from the Main Menu, select Setup, Port Settings, then User Comm. Then, follow these steps.
1.Press R until you see
USER COMM
lReset
2.Press E. You will see
Are you sure?
No r
3.Press L or R to make your selection, press E. Press U three times to exit to the Main Menu.
