Error | Description |
758Either the supply is not seen or the
763 | Waiting to dispense label. Press Feed. |
765The printhead has less than four bad dots. The printer can shift bar code fields to avoid bad dots. Press Clear to continue printing. Print a test label to confirm the number of bad dots.
768Printhead has more than 10 bad dots or is not connected. Connect the printhead.
791The printer has an error pending. Turn off the printer. Wait 15 seconds (until the power light is completely dim) and turn it back on. Resend the packets.
Check with your System Administrator for any message not listed.
P r i n t e r S p e c i f i c a t i o n s
Height: | 13 inches (330 mm) |
Width: | 12 inches (305 mm) |
Depth: | 13 inches (330 mm) |
Weight: | 26 lb. (12 kg) |
Shipping Weight: | 30 lb. (13.6 kg) |
Printhead: | Thermal at 4 inches (102 mm) wide |
| 203 dpi (8.0 dots per mm) |
Printing Method: | Thermal Transfer (ribbon) or Thermal Direct |
Maximum Image | 4.0 inches (102 mm) by 6.0 inches (152 mm) |
Size: |
|
Power: | 115 VAC, 60Hz, 100 VAC, 50/60 Hz, 230 VAC, 50 |
| Hz (Switching power supply) |
Operating Limits: | For Thermal Transfer (ribbon) 40° to 95° F |
| (4° to 35° C) |
14
