Paxar Monarch 9805 manual M m o n Error s, Error Description

C o m m o n E r r o r s

Error	Description
025	String length is outside the range 0 to 2710.
101	The format referenced by batch is not in memory.
409	The printer memory is full. Delete unnecessary formats or
	graphics from memory.
410	Parity mismatch.
411	Framing error (baud rate mismatch).
412	Flow control mismatch.
413	Online receive queue is full. Check for a flow control problem.
611	Font, bar code, or density in the batch does not fit the format.
612	The data in this line of the batch is either missing or does not
	match the format.
613	Reference point off supply.
614	Portion of field off supply or there may be an invalid character
	in the packet.

703The printer sensed a calibration of different-sized black marks. Make sure the correct supply is loaded. The 9805 printer does not support black mark supply.

704Printer has not sensed a supply mark within the specified number of inches or is out of supplies. Check the supply tracking, supply marks, black mark sensor position, and supply roll for binding. Change supply. Press Clear.

750Printhead is overheated. Turn off the printer.

751Printer did not sense a black mark when expected. For errors 751-753, Check the supply tracking, supply marks, black mark sensor position, and supply roll for binding. Press Clear and try to continue printing. Change supply. The 9805 printer does not support black mark supply.

752Printer sensed a mark in the wrong place. The 9805 printer does not support black mark supply.

753Printer sensed a mark that is too long. The 9805 printer does not support black mark supply.

754Check for a ribbon jam or remove any slack by turning the take-up reel clockwise.

755Printhead is open. Close the printhead before continuing.

756Load supplies.

757Load supplies (supply length mismatch), because the calibrated supply length differs by plus or minus .25 inches from the format. Press Feed.

13