For Thermal Direct 40° to 104° F (4° to 40° C)
Print Speed: 2.5 ips (64 mm) for all serial bar codes and 4.0 ips (102 mm). 6.0 ips (152 mm) is available only for thermal transfer printing.
S u p p l y S p e c i f i c a t i o n s
For high temperature or high humidity environments, contact Monarch for supply recommendations. Continuous supply does not have perforations or black marks and must be used in continuous mode.
Supply Types: Thermal Transfer, Direct Die Cut, or Continuous without black marks
Supply Widths: 1.2 inches (31 mm) minimum 4.25 inches (108 mm) maximum
Supply Lengths: 1.0 inch (31 mm) minimum 6.5 inches (165 mm) maximum
Supply Roll Length: 2,952 inches (75 meters)
R i b b o n S p e c i f i c a t i o n s
Do not leave ribbon in sunlight, high temperatures or humidity.
Ribbon Type: | Standard |
Ribbon Widths: | 1.3 inches (33 mm) |
| 1.6 inches (41 mm) |
| 2.16 inches (55 mm) |
| 3.15 inches (80 mm) |
| 4.13 inches (105 mm) |
Ribbon Length: | 23,600 inches (600 meters) |
A b o u t R i b b o n s
The width of the ribbon must be greater than the supply width. Since some supplies are more abrasive to printheads than others, using a ribbon wider than your supply helps protect the printhead. Replacement printheads are expensive.
15
