10.Tape the ribbon to the take-up core. Do not tape the ribbon to the take-up reel.
11.Rotate the take-up core until the leader is past the printhead and remove any slack in the ribbon by turning the take-up reel clockwise.
12. Hold the printhead assembly Printhead by the printhead tab while
pressing down on the printhead release.
13.Close the printhead by pressing down on the thumb well until you hear it click into place. Close the cover.
P r i n t i n g
1.Turn on the printer.
2.Download a format and a batch. The printer prints a strip of labels.
3.Remove the printed labels.
If you turn off the printer, you must wait 10-15 seconds (until the power light is completely dim) before turning it back on; otherwise an error occurs.
O n - D e m a n d M o d e P r i n t i n g
In on-demand mode printing, the first label is printed and dispensed. The next label prints when the previous label is removed. If a label does not print, make sure the supply sensor is clean and not blocked. You must use on-demand printing with peel mode. The printer backfeeds only in on-demand mode.
P r i n t i n g t h e E u r o - D o l l a r S y m b o l
You can print the Euro-Dollar symbol (c) online by using ~192 (ASCII code) in the data stream. Your System Administrator can also select the Euro-Dollar symbol by sending the Monetary Formatting Packet (packet
D). For more information, refer to the optional Packet Reference Manual available from our Web site or in a printed version by ordering part number TC9800PM.
