3.Use the Search (<</>>) buttons to move around within the menu. Highlight Alarm Output and press the Play/Pause button to select. The Alarm Output menu appears.
ALARM OUTPUT |
|
Enable Alarm Output: | 00 |
Disable Alarm Output: | 24 |
Automatically Enable |
|
Alarm Output:
Quit
On
4.Use the Search (<</>>) buttons to highlight the fields for starting and ending times. When you highlight a field, use the number buttons to enter the time. The starting and ending times refer to the hour. Enter two digits. Enter the hours in
At the bottom of the screen is a bar that shows the hours when the alarm output will be enabled. Red means enabled and white means disabled.
5.Use the Search (<</>>) buttons to highlight Automatically Enable Alarm Output, and then press the Play/Pause button to toggle between On or Off.
6.When you finish, use the Search (<</>>) buttons to highlight Quit, and then press the Play/Pause button to select. The Setup Menu appears.
TIP: Pressing the Stop button also returns you to the Setup Menu.
7.Use the Search (<</>>) buttons to highlight another menu item in the Setup Menu and then press the Play/Pause button to select it, or highlight Exit and then press the Play/Pause button to end the programming session.
14 |
