PASSWORD MENU
Use this menu to change the password (optional).
Skip steps 1 and 2 if you are already in the Setup Menu.
1. Press and hold the Function button. The Function Key List appears. Keep holding the Function button.
FUNCTION KEY LIST
0 : Setup
1 : Camera 1 recording/stop
2 : Camera 2 recording/stop
3 : Camera 3 recording/stop
4 : Camera 4 recording/stop
5 : All the cameras recording
6 : All the cameras stop
: Alarm On : Alarm Off
2. Press and release the 0 button, and then release the Function button. Enter the password if requested. The Setup Menu appears.
SETUP MENU
Camera/Audio
All Resolution
Alarm Output
Time
Password
Program Update
Exit
Help: ON
3.Use the Search (<</>>) buttons to move around within the menu. Highlight Password and press the Play/Pause button to select. The Password menu appears.
PASSWORD
User level password protection:
Password change
Quit
Off
4.Use the Search (<</>>) buttons to highlight User Level Password Protection, and then press the Play/Pause button to toggle between On or Off.
ENTER PASSWORD
“Input your password.”
5.Use the Search (<</>>) buttons to highlight Password Change, and then press the Play/Pause button to select. The Enter Password screen appears.
6.The DVR ships from the factory with a password of 0000. Enter four numbers for a new password.
7.You will be prompted to verify your password by entering it a second time. If the two passwords agree, “Registered” appears on the screen and then the Password menu reappears. If the passwords do not agree, “Registration Cancelled” appears on the screen and then the Password menu reappears.
8.Use the Search (<</>>) buttons to highlight Quit, and then press the Play/Pause button to select. The Setup Menu appears.
TIP: Pressing the Stop button also returns you to the Setup Menu.
9.Use the Search (<</>>) buttons to highlight another menu item in the Setup Menu and then press the Play/Pause button to select it, or highlight Exit and then press the Play/Pause button to end the programming session.
16 |
