Appendices
APPENDIX A: EXPANDING VIDEO STORAGE
You can increase the video storage capacity of the NVR5100 by adding one or more SEB5100 Series storage expansion boxes. Each SEB5100 adds up to 9.0 TB of total capacity (up to 6.98 TB of video storage). You can add up to eight SEB5100 Series units to expand the total capacity for each NVR5100 up to 81 TB of total capacity (up to 62.8 TB of video storage).
You can expand the NVR5100 two ways, depending on your future expansion requirements:
•Add a single SEB5100 to a single NVR5100 using a single cable.
•Add one or more SEB5100 units to a single NVR5100 using a Gigabit Ethernet switch.
INSTALLING A SINGLE SEB5100 UNIT (CABLE)
To connect a single SEB5100 to a single NVR5100:
1.Connect one end of the UTP cable to the secondary network connector 
UTP cable with
NOTE: Do not connect the UTP cable to the primary network connector 
NVR5100
ENDURA NETWORK
SEB5100
on the NVR5100 rear panel. Use a standard Cat5e or better
on the NVR5100.
UTP
CABLE
Figure 25. Connecting an NVR5100 Directly to an SEB5100
2.Connect the other end of the UTP cable to the network connector 
on the SEB5100 rear panel.
NOTES:
•You do not have to shut down the NVR5100 to add an SEB5100 with a UTP cable.
•Do not connect the UTP cable to the reserved connector 
on the SEB5100.
•To change from a UTP cable to a Gigabit Ethernet switch, you must shut down the NVR5100 and the SEB5100 (refer to Unit Shutdown on page 27).
31 |
