Pelco c649m Skip Search, Adjustment During Playback 9.4.1 Tracking Adjustment, If Noise Appears

9.3.2 Skip Search

The VCR will fast forward or rewind until it finds an index signal. It then plays back for about four seconds in 2H or 6H mode. It repeats this process until reaching the end or beginning of the tape.

1.Press the COUNTER MEMORY/SKIP/INDEX button to illuminate SKIP on the fluorescent display.

2.Turn the SHUTTLE ring to the right or left.

3.Press the PLAY button when the desired location is found. Or, press the STOP button to end the skip search.

The index signal may be hard to find in some recording conditions.

Present position

NOTES:

•Noise bars may appear when in reverse playback or reverse slow mode.

•Noise bars will move continuously through the picture when pressing and holding a TRACKING button (except in L24H playback mode).

•Noise bars will move through the picture each time a TRACKING button is pressed (in L24H play- back mode).

•Noise may appear when a tape re- corded in 2H mode is played back in L24H mode, despite adjustment with the TRACKING buttons.

Index			Index
	ALARM			ALARM
	RECORDING			RECORDING
Fast forward		Fast forward			Fast forward
Approx. 4 sec.			Approx. 4 sec.
playback			playback

Figure 29. Skip Searching

9.4ADJUSTMENT DURING PLAYBACK 9.4.1 Tracking Adjustment

If noise appears in the picture during playback, fast playback, reverse playback, or forward/reverse slow playback, adjust the TRACKING buttons (+ and -) for the best picture.

Press the PAUSE/SHUTTLE HOLD button while turning and holding the SHUTTLE ring to adjust the tracking in fast playback, reverse playback, or forward/reverse slow playback.

To return tracking to its initial setting, press the TRACKING buttons at the same time during playback, reverse playback, or forward/reverse slow playback,

IF NOISE APPEARS

	POSITION/		POSITION/
TRACKING	VERTICAL	TRACKING VERTICAL
	ADJUST		ADJUST

Figure 30. Tracking Adjustment

Pelco Manual C649M (7/99) 45