Pelco c649m operation manual First Time SET UP Menu, First Time Set Up Menu

ALL MENU Turn the SHUTTLE ring to the right and the words ALL MENU

INITIALIZE INITIALIZE will be displayed. When you turn the SHUTTLE ring to the left, all settings (except the TIMER RECORDING setting) will be cleared. Turn the SHUTTLE ring to the right to return to the Maintenance menu.

POWER LOSS Turn the SHUTTLE ring to the right and the words POWER

LIST CLEAR LOSS LIST CLEAR will be displayed. When you turn the SHUTTLE ring to the left, the list will be cleared. Turn the SHUTTLE ring to the right to return to the Maintenance menu.

ALARM LIST Turn the SHUTTLE ring to the right and the words ALARM LIST

CLEAR CLEAR will be displayed. When you turn the SHUTTLE ring to the left, the list will be cleared. Turn the SHUTTLE ring to the right to return to the Maintenance menu.

6.10 FIRST TIME SET UP MENU

<FIRST TIME SET UP>	STOP
TAPE END
QUASI V-SYNC	ON
TAPE LENGTH	T-120
VIDEO MODE	COLOR
PB HEAD SELECT	NORMAL
BUZZER	WRNG
TIME DATE ADJUST

Figure 15. First Time Set Up

Menu

NOTE: Some multiplexers may re- quire Quasi V-Sync OFF to work properly. With the Pelco MX4000 Series Genex™ Multiplexer, setting Quasi V-Sync on or off has no ap- parent effect on playback.

TAPE END	Sets the VCR’s state of operation when the tape runs out during
	recording. The default is STOP.
	• STOP – The tape stops. “End” appears on the fluores-
	cent display and “Tape End” on the monitor. When CALL
	OUT is set to WRNG•TAPE END, a call signal is output
	from the CALL terminal.
	• REWIND – Rewinds the tape to the beginning and stops
	(except during timer recording). When CALL OUT is set
	to WRNG•TAPE END, a call signal is output for two sec-
	onds from the CALL terminal.
	• REPEAT – Rewinds the tape to the beginning and re-
	sumes recording.
	• ALARM•PROT – (Alarm Protection) If alarm recordings
	are on the tape, then the tape stops. “End” appears on
	the fluorescent display and “Tape End” on the monitor.
	When CALL OUT is set to WRNG•TAPE END, a call sig-
	nal is output from the CALL terminal. If there are no alarm
	recordings, the tape is rewound and recording continues.

QUASI V-SYNCSets Quasi V-Sync on or off. The default is ON.

•ON – Quasi V-Sync signal is inserted on the video output signal when in the special playback modes (still, slow motion, reverse, fast playback, speed search) and during normal playback in L18H, L24H, 24H – 168H, or 0H modes.

•OFF – Quasi V-Sync signal is not inserted.

TAPE LENGTH Sets the tape length to match the tape so the tape remaining

indicator works correctly. Set as follows:

•T-120 – When using T-120 tape.

•T-160 – When using T-160 tape. The default is T-120.

VIDEO MODE Set as follows:

•COLOR — Select for color recording or playback.

•B/W — Select for black and white recording or playback.

26 Pelco Manual C649M (7/99)