Pelco c649m Additional Functions and Features, Counter, Memory Backup in Case of Power Failure

10.0 ADDITIONAL FUNCTIONS AND FEATURES

NOTE: The counter display is stored in memory when the power is turned off, so the same numbers will be displayed when the power is restored.

10.1 COUNTER

10.1.1 Counter Memory

Press the COUNTER MEMORY/SKIP/INDEX button repeatedly until the “M” indi- cator appears on the fluorescent display. Turn the SHUTTLE ring to the right and the tape will rewind to the 00000 position of the counter and stop. (The rewind to 00000 is slightly inaccurate.)

10.1.2 Tape Counter

A five-digit counter indicates the relative position on the recorded portion of the tape. If a portion of the tape is not recorded on, the counter will not increase or decrease during play, FF/RWD, or search modes.

EEEEE illuminates to show VCR power is in standby mode.

10.1.3Counter Reset

Press the COUNTER RESET button to reset the counter to 00000.

10.2 MEMORY BACKUP IN CASE OF POWER FAILURE

NOTE: The backup is for memory only–the VCR will not continue re- cording during a power outage un- less connected to a UPS.

The VCR includes a built-in memory backup so the presets for time/date, alarm list, power loss list, and the number of tape uses will remain in memory if there is a power failure or if the power cord is disconnected from the AC outlet. Presets re- main in memory for a maximum of 31 days provided the VCR has been connected to AC power for at least 40 hours per week. Connection charges the battery backup.

Check the time if there has been a power failure or if the power cord has been disconnected from AC power for a prolonged period.

<POWER LOSS LIST>

0103 - 01 - 98 01 : 00

10.3 POWER FAILURE TIME DISPLAY

Power failure start times are stored in memory, so you can confirm the start times.

1.Press the DISPLAY button to display the Main menu.

2.Turn the JOG dial to select MAINTENANCE and turn the SHUTTLE ring to the right. The Maintenance menu will appear.

3.Turn the JOG dial to select POWER LOSS LIST and turn the SHUTTLE ring to the right. POWER LOSS LIST will appear.

Up to three power failure start times will be displayed. If more than three failures occurred, the first and last two times will be displayed.

To reset the power loss list, select POWER LOSS LIST CLEAR in the Maintenance menu and turn the SHUTTLE ring to the right. The POWER LOSS LIST CLEAR screen will appear. Turn the SHUTTLE ring to the left.

Pelco Manual C649M (7/99) 47