Pelco c649m operation manual Day and Time Display Modes

12 3 4

01-01-97 00:00:00 A0001

Figure 16. Display Mode 1

12 3

01-01-97	WED	A0001
00:00:00	L18

45 6

Figure 17. Display Mode 2

PB HEAD	Sets the heads for playback. When you turn the JOG dial to the
SELECT	right, the display switches in the following order: NORMAL, L/
	L (left/left), R/R (right/right), AUTO, NORMAL. The default is
	NORMAL.
	The VCR has two pairs of SP (standard play) heads. Some
	VCRs make time-lapse recordings using same-azimuth heads,
	which are not VHS compatible. Playback of such tapes with the
	NORMAL setting will have picture/noise with a 30 Hz flicker, or
	just noise. For proper playback, adjust the setting to AUTO, or
	set to L/L or R/R. One setting will give normal play. After playing
	a tape with L/L or R/R settings, return the setting to NORMAL.
BUZZER	Sets the conditions for which the buzzer sounds. The default is
	WRNG.
	• WRNG – The buzzer sounds when there is any malfunc-
	tion in the VCR.
	• WRNG•TAPE END – The buzzer sounds when there is
	any malfunction in the VCR or at the tape end.
	• WRNG•REMAIN – The buzzer sounds when there is any
	malfunction in the VCR or when the tape (T-120 or T-160)
	has about three minutes left in 2H mode.
	• OFF – The buzzer does not sound.
TIME DATE	Sets the time, date, and Daylight Savings setting. Section
ADJUST	6.10.1 provides an explanation while Section 6.10.2 provides a
	procedure.

6.10.1 Day and Time Display Modes

DISPLAY MODE 1

1.Month-Day-Year

2.Hour:Minute:Second

3.Daylight Savings Time symbol or power failure symbol

4.Alarm recording number

•A 24-hour display is used: 00:00 indicates midnight; 12:00, noon; and 15:00, 3 p.m.

•An alarm recording number is displayed during alarm recording.

DISPLAY MODE 2

1.Month-Day-Year

2.Day of the week

3.Alarm recording number

4.Hour:Minute:Second

5.Daylight Savings Time symbol or power failure symbol

6.Recording mode

•A 24-hour display is used: 00:00 indicates midnight; 12:00, noon; and 15:00, 3 p.m.

•The day of the week is automatically set.

•An alarm recording number is displayed during alarm recording.

Pelco Manual C649M (7/99) 27