Pelco c649m Troubleshooting, SELF-DIAGNOSTIC Function and Warning Display, Indication

12.0TROUBLESHOOTING

12.1SELF-DIAGNOSTIC FUNCTION AND WARNING DISPLAY

The VCR uses self-diagnostics to detect internal malfunctions during recording. If one occurs, the VCR indicates it on the monitor and in the VCR’s fluorescent dis- play.

Table J shows the type of malfunction corresponding to the warning display and the action to take.

Table J. Warning Display and Actions

FLUORESCENT	MONITOR	CAUSE	REMEDY	TO TURN OFF
DISPLAY				THE INDICATION
End	TAPE END	The tape ends	Rewind the tape and	Turn off the indication on the
		during recording.	press the EJECT	fluorescent display and on the
			button.	screen by pressing the EJECT
				button or rewinding the tape.
–	NO SIGNAL	Lack of video signal		When a video signal is restored
		input*.	Check for loose	or the record mode is cleared,
			connections.	the indication on the screen
				turns off.
–	CHECK	Tape/deck trouble.	First, check the cassette. If there seems to be nothing
			wrong with it, try recording again. If “CHECK” is still
			displayed, change the cassette with a new one and try
			recording again. Otherwise, unplug the power cord and
			contact the dealer.

*Lack of video input signal.

If the VCR is set to record and it does not detect an input signal, NO SIGNAL appears on the monitor and the call signal is output from the rear terminal.

Check that the cable from the camera is not broken and the camera's power has not been lost.

50 Pelco Manual C649M (7/99)