REMOTE CONTROL FUNCTIONS
Figure 16. Remote Control Functions
1.MUTE: Turns on/off sound.
2.POWER: Switches the monitor from standby mode to on, and back to standby mode.
3.LOCATE: Selects a location for the subpicture. Available in PIP (picture-in-picture) mode only.
4.SIZE: Selects a size for the subpicture. Available in PIP mode only.
5.SWAP: Switches the main picture and subpicture. Available in PIP and PBP modes only. (PBP is picture-by-picture, which is two images of the same size side by side on the screen.)
18 | C2938M (12/06) |
