Pelco PMCP660, PMCP650 manual Installation, Desktop Stand, Rear Panel Connectors

Installation

The monitor can be placed on any flat surface (desk or table), or it can be wall mounted. You can remove the desktop stand by removing the screws that secure it to the monitor.

NOTE: Only use a recommended wall mount kit, such as the PMCP-WM, PMCP-WMT, or PMCP-WM60. To wall-mount the monitor, follow the instructions supplied with the optional mount kit. Refer to manual C2230M for the wall mount kit instructions.

DESKTOP STAND

You can remove the desktop stand by removing the screws.

REAR PANEL CONNECTORS

NOTE: There is a slight difference in the location of external speaker jacks on the 600 Series models.

OR

Figure 2. Rear Panel Connectors

8 C2938M (12/06)