6.A.SWAP: Selects audio for the main or subpicture. Available in PIP and PBP modes only.
7.SPLIT: Selects a PIP mode (NORMAL, PIP, PBP).
8.S.SELECT: Selects the main picture or subpicture. Then you can adjust the status of the selected picture. Available in PIP and PBP modes only.
When in PIP or PBP mode, this button lets you put “focus” on either the subpicture (PIP) or the main picture. For example, select the subpicture. Any adjustment made to the picture will affect only the PIP.
9.MENU: Activates the OSD
10.VOL: Adjusts the volume up or down.
11.and : Used in the selection process when navigating menus and submenus.
12.INPUT: Displays the available input sources.
13.AUTO: Auto adjusts the image with RGB and DVI if not centered correctly.
14.I.SIZE: Determines whether to display the image in wide screen, zoom, 4:3, etc.
15.FREEZE: Freezes the screen display. The playback system will continue playing.
16.(not in use)
17.RECALL: Shows the current input and sleep timer.
18.SLEEP: Turns the timer on and activates the sleep timer.
NOTE: In Figure 16, buttons on the remote control that are not identified by a callout are disabled.
C2938M (12/06) | 19 |
