VMX300(-E) MONITOR OUTPUTS
1. Connect the VGA adapter to the digital video interface (DVI) connector on the rear panel.
Figure 2. Monitor Port Adapter Connection
2.Use the monitor cables provided with your monitors (not supplied) to connect monitors to the workstation as follows:
• Dual-monitor systems: Connect the left monitor to the bottom input and the right monitor to the top input (refer to Figure 3).
RIGHT VGA
MONITOR
LEFT VGA
MONITOR
Figure 3. How to Connect Monitors to a VMX300(-E) Workstation
•Single-monitor systems: If you are using just one monitor, use the top monitor input only (refer to Figure 4).
Figure 4. How to Connect a Single Monitor to a VMX300(-E) Workstation
2 | C1563M (2/08) |
